INVT Drive for Agarbatti Making Machine

INVT Drive for Agarbatti Making Machine :

Detailed Description: INVT G20 Drive for Agarbatti Machine (Pre-Programmed at 65 Bit)

The INVT G20 Drive is a high-performance variable frequency drive (VFD) widely used in automation and industrial control applications, including fully automatic agarbatti (incense stick) machines. Designed to control the speed and torque of AC motors, this drive ensures smooth, reliable, and energy-efficient operation of the agarbatti machine.

Our version of the INVT G20 drive comes pre-programmed at 65-bit configuration, specifically tuned for agarbatti manufacturing processes, offering optimal performance right out of the box.

🔧 Key Features:

• Model: INVT G20 Drive
• Configuration: Pre-programmed at 65-bit, optimized for agarbatti machines
• Input Voltage: 220V (single-phase) / 380V (three-phase) options
• Motor Control Type: V/F control
• Compact Design: Space-saving and easy to install
• User-Friendly Interface: Simple parameter setting and monitoring
• Energy Efficient: Reduces power consumption while maintaining machine output
• Overload Protection: Built-in safety features to protect motor and drive

🎯 Advantages for Agarbatti Machine Use:

• Smooth Machine Operation: Ensures consistent stick production with precise motor speed control
• Reduced Wear and Tear: Controlled start/stop reduces mechanical stress on moving parts
• Less Downtime: Pre-programmed parameters mean quick setup and minimal adjustments
• Custom Optimization: 65-bit programming tailored for agarbatti extrusion speed and rhythm
• Longer Machine Life: Better motor protection and consistent performance

🛠️ Installation & Warranty Support (When Purchased from Us):

When you purchase the INVT G20 Drive from us, you not only receive a high-quality, pre-configured product, but also complete after-sales support:

• ✅ Free Installation Support: Our technician will install and calibrate the drive with your machine at your site or guide you remotely.
• ✅ Technical Assistance: We help you with any settings or troubleshooting required during operation.
• ✅ Warranty Provided: 6-month to 1-year warranty (based on model) covering manufacturing defects and programming support.
• ✅ Ready-to-Use: No additional setup needed—just plug and start production.

💡 Recommendation:

If you’re looking to upgrade or replace the VFD in your agarbatti machine, the INVT G20 Drive (pre-programmed at 65-bit) offers a reliable, easy-to-use, and production-ready solution, with the added benefit of installation and warranty support when purchased from us. Perfect for small to large-scale manufacturers looking for stability and efficiency.

• Origin : India
• Programmed : preprogrammed @ 60bits.
• Description : In all original Hung Tuan machines, uses an INVT drive for power management. INVT drive is like a CPU of the machine which directs the motor to rotate according to the command sent by sensors. The drive manager uses the motion of the drive and full mechanism to operate smoothly and also keeps a constant supply of electricity to the machine . Used for models for HT01 and HT02.
• Caution : Keep the mani supply of the machine and plug out the socket of the machine from the switch board in case of lightning and voltage fluctuations as it may cause short circuit and may show error on drive display pannel located inside the machine cabinate.
• Price : Rs 12500

Diagram: G20 Inverter Drive in Agarbatti Machine

Explanation:

• AC Power Supply: The machine receives standard 220V AC input.

• G20 Inverter Drive: This is a variable frequency drive (VFD) that converts the fixed-frequency AC input into variable frequency and voltage output to control motor speed.

• Three Phase AC Motor: The inverter powers a 3-phase motor whose speed is precisely controlled by the drive.

• Gearbox/Transmission: The motor’s rotational speed is reduced or adjusted as needed to drive the agarbatti extrusion or feeding system.

• Agarbatti Extrusion / Feeder Mechanism: The final stage where incense paste is extruded into sticks with controlled speed and torque.

To generate a wiring diagram for an INVT GD20 VFD (Variable Frequency Drive) for an agarbatti (incense stick) making machine, I need a bit more detail to tailor it precisely. However, I can provide a standard wiring layout commonly used in these setups.

Assumptions:

• You are using a 3-phase motor.
• The INVT GD20 is being used to control the speed of the motor.
• Input power is three-phase AC or single-phase AC, depending on your model.
• You want to use basic start/stop operation (no PLC or advanced control).

🧰 Typical Components Needed:

• INVT GD20 VFD
• 3-phase induction motor
• MCB (Miniature Circuit Breaker) or MCCB
• Contactor (optional)
• Overload relay (optional)
• Potentiometer (for speed control, if desired)
• Start/Stop push buttons (for manual control)
• Control wiring (24VDC or 220VAC as per configuration)

⚡ Wiring Diagram Overview:

[ Power Supply ]
      |
      |  (R)  (S)  (T)          ----> 3-Phase Input to VFD
      +---+---+---+
          |   |   |
       [ MCB / MCCB ]
          |
      +---+---+---+
      |   INVT GD20   |       <---- VFD
      |               |
      |  L1  L2  L3   | <-- Power Input
      |  U   V   W    | --> Motor Output
      |               |
      +-------+-------+
              |
         3-Phase Motor
              |
         [Agarbatti Machine]

🕹️ Control Wiring (if using buttons or potentiometer):

• Start Button (NO) → DI1 to COM
• Stop Button (NC) → DI2 to COM
• Potentiometer (10kΩ):
  • One end to +10V
  • Wiper (middle pin) to AI1
  • Other end to GND

⚙️ VFD Parameter Configuration:

To make it work for motor control:

• P00.01 = 1 (Control mode: terminal control)
• P00.06 = 8 (Frequency source: AI1 for potentiometer)
• P00.07 = 0 (Stop mode: deceleration stop)
• P01.00 = Motor rated voltage
• P01.01 = Motor rated current
• P01.02 = Motor rated frequency
• P01.03 = Motor rated speed